How Do I Pour Fishing Worms?

How Do I Pour Fishing Worms?Plastic worms are an important tackle item for freshwater anglers, especially those going after bass. Replacing worn, lost or broken plastic worms is a consistent affair for the constant angler and it can become expensive.

By pouring your own plastic worms, you will always have extras on hand when you need them. You will also be able to create any color or style of worm desired. The process of pouring your own worms is relatively basic. Before you know it, your tackle box will be overflowing in homemade fishing worms.


Difficulty: Moderately Easy

How to:

Things You’ll Need:
  • Work table
  • Newspaper
  • Worm mold
  • Plastic
  • Aluminum pan
  • Candy thermometer
  • Hardener
  • Softener
  • Wooden craft stick
  • Color
  • Glitter
  • Vegetable spray
  • Container
  • Water
  • Towel
  • Worm oil
  • Plastic bag
Step 1
Cover a flat surface such as a table in a ventilated area with newspapers. The newspaper will catch any spilled plastic or paint, when making plastic worms. Place the worm mold flat on the table.
Step 2
Pour approximately 1 oz. plastic, which makes six worms, into an old aluminum pan that has a pouring spout. You can purchase containers of plastic granules at outdoors shops or craft stores. Using a small pan with a pouring spout makes pouring the liquefied plastic a bit easier.
Step 3
Situate the plastic-filled pan on the stove. Turn the stove to medium-low heat, slowly melting the plastic. Heat the plastic until it reaches 350 F, using a candy thermometer to test the temperature, if needed. When ready, the plastic is thick and clear.
Step 4
Add hardener or softener to the mixture adjusting the texture of the worm, if desired. Follow the package instruction concerning the amounts required. You can better adjust the quantity needed of each after experimenting making two to three worms.
Step 5
Stir the mixture with a wooden craft stick. Mix the worm color by shaking the bottle and add it to the plastic, drop by drop, until you achieve the desired worm color. Stir the mixture well.
Step 6
Shake a small amount of glitter into the mixture, if desired. Read the package instructions, as you do not require much. Stir until thoroughly mixed together.
Step 7
Spray the worm mold cavity with a vegetable spray to keep the worms from sticking to it. Pour the plastic slowly through the pan's spout into the worm mold cavities. Fill the mold cavity full, not allowing the plastic to overflow over the mold's edges.
Step 8
Fill a container long enough to house the worms without bending, with water. After about three minutes, pull the worms out of the mold gently, placing them into the water.
Step 9
Remove the worms from the water after approximately 10 minutes of cooling time. Space them out evenly on a towel until they dry.
Step 10
Squirt worm oil into a plastic bag, swishing it around and then place the worms inside. Squish the worms around in the bag, coating them with the oil. Add more oil if needed and store the worms in a cool, dry area.

Tips & Warnings

You can wear safety glasses and leather gloves when making the worms if you are afraid you might spill the plastic on your skin.
Keep children and pets away from the worm-making area so they do not get burned by the melted plastic.

Article Written By Joyce Starr

Joyce Starr is a professional writer from Florida and owns a landscaping company and garden center. She has published articles about camping in Florida, lawn care and gardening and writes for a local gardening newsletter. She shares her love and knowledge of the outdoors and nature through her writing.

Don't Miss a Thing!

All our latest outdoor content delivered to your inbox once a week.



We promise to keep your email address safe and secure.